← All articles
installation · doors · advice

Bought Your Own Garage Door? What Installation Includes and What to Check

November 3, 2026 · 6 min read · Braxdyne Garage Doors & Gates, Sacramento region

More Sacramento homeowners are buying their own garage door or opener, from a home improvement store, a supplier, or online, and then looking for someone to install it. That can work well. It can also lead to a frustrating day if the door that arrives does not fit the opening, a part is missing, or nobody planned for the old door coming out.

This guide explains what a garage door or opener installation usually involves, what to check on your order before the technician arrives, and how to get the garage ready so the job goes smoothly.

What a Garage Door Installation Usually Includes

Every job is a little different, so always ask what is and is not part of the work you are booking. A typical installation of a new sectional door covers:

  • Removing the old door. The springs on the old door are still under tension, so they have to be safely unwound before the door comes down. Ask ahead whether hauling away the old door is part of the job or something you need to arrange.
  • Checking the opening. The installer looks at the jambs, the header above the door, and the floor. Soft or rotted wood and a badly uneven slab are worth knowing about before the new door goes in.
  • Assembling and hanging the sections, with hinges, rollers, and the bottom weather seal.
  • Installing the tracks and securing them to the jambs and ceiling.
  • Installing and setting the springs and cables. Torsion springs usually arrive unwound. Winding them to the right tension for the door's weight is the most dangerous part of the whole job and belongs to the technician.
  • Balancing and adjusting the door so it travels smoothly and stays put when stopped partway.
  • Connecting the opener, if you have one, and setting travel limits and force.
  • Testing the safety features, including the photo eyes and the automatic reverse.

What is often not included

Some work sits outside a door installation, and it helps to know this early:

  • Repairing or replacing rotted jambs, the header, or framing.
  • Adding a ceiling outlet for the opener. Electrical work should be done by an electrician.
  • Drywall, trim, or painting around the opening.
  • Permits or HOA approval, which are the homeowner's job to check.

Check Your Order Before the Technician Arrives

Most installation-day problems start with the order, not the installation. Open the boxes, or at least read every label, as soon as the delivery comes.

1. Size and fit

Measure the opening yourself and compare it with the door you ordered: width and height of the opening, headroom (the space between the top of the opening and the ceiling), side room on both sides for the tracks, and the depth of the garage for the horizontal tracks and the opener. If your garage has a low ceiling, a beam, or ductwork in the way, check whether your order includes a low-headroom kit or a different track setup. A door that is the right size for the opening can still be the wrong door for the garage.

2. Everything is in the shipment

Doors usually come in several boxes: the sections, a hardware kit, tracks, springs, and sometimes struts, a lock, and window inserts. Count the boxes against the packing list. Look for a spring label or a door weight on the paperwork, since the springs need to match the door. If anything is damaged or missing, contact the seller before installation day, not after.

3. Spring type

Check whether the kit uses torsion springs above the door or extension springs along the tracks. Our guide to torsion vs. extension springs explains the difference. If you are replacing one type with the other, mention it when you book, because the mounting is different.

4. The opener

  • Check that the rail length matches your door height. Taller doors often need an extension kit.
  • In California, new openers sold or installed for homes must have a battery backup. Our article on California's battery backup law explains what that means.
  • If you bought a smart or Wi-Fi opener, make sure your Wi-Fi reaches the garage. Our smart opener guide covers what to expect.
  • If you plan to keep your old opener with the new door, ask whether it is in good enough condition and has working safety sensors.

5. Paperwork

Keep the receipt, the installation manual, and the warranty card together. Some manufacturers have warranty conditions about how the door is installed or registered, so read them before the job.

Permits and HOA Approval

Rules differ between cities and counties in the Sacramento region. If you are not sure whether replacing your garage door needs a permit where you live, check with your city or county building department before you schedule the work. If you live in an HOA, many associations have rules on color, style, and windows. Get any approval in writing before the door is ordered. Our HOA guide goes into more detail.

What You Can Safely Do Yourself

  • Measure the opening, headroom, side room, and depth, and take photos of the inside of the garage around the door.
  • Store the boxes flat, dry, and out of the way. Door sections can scratch or dent if they lean against a wall or get wet.
  • Clear the area: move cars out, and keep the space in front of the door and along the side walls and ceiling free of shelves, bikes, and storage.
  • Make sure there is a working outlet where the opener will go, and that the breaker is easy to find.
  • Keep children and pets away from the work area on installation day.
  • Read the warranty and the manual so you know which steps the manufacturer expects from the installer.

What not to do: do not try to wind, adjust, or unwind springs, and do not loosen the bottom brackets or cables on the old door. Do not try to take the old door down yourself to save time. The old springs still hold the door's weight, and removing it without releasing that tension safely is how people get hurt.

When to Call a Technician

Call before installation day if:

  • Your measurements do not match the order, or you are not sure which measurements matter.
  • The old door has a broken spring, a loose cable, or is off track. That needs to be handled safely first. See our spring repair page.
  • You are not sure whether your old opener can stay. Our opener repair service can check it.
  • The jambs or header look soft, cracked, or water damaged.

If you have bought a door or an opener and want help, call Braxdyne or send photos of the boxes, labels, and the inside of your garage. We will tell you what the job involves and whether it is one we can take on.

FAQ

Can a technician install a door I bought online?

Often, yes, as long as the door fits your opening and all the parts are there. Before booking, share the brand, model, size, and spring type, plus photos of the garage, so the technician can confirm the fit and bring anything that might be missing.

Do I need to remove the old door before the installer comes?

No, and you should not try. The old door's springs are still under tension, and removing it safely is part of the job. Just ask in advance whether hauling away the old door is included.

Can I keep my old opener with a new door?

Sometimes. It depends on the opener's condition, whether its safety sensors work, and whether it suits the new door's size and weight. Have it checked during the visit, and test the auto-reverse after installation either way.

Need a technician? Call Braxdyne.

Call now Free estimate