Electric Driveway Gate Repair

An electric driveway gate is supposed to make life easier. When it stops halfway or ignores your remote, you end up wrestling a heavy gate by hand or leaving your property open.

Braxdyne Garage Door Repair offers electric gate repair in Sacramento and across the surrounding region. We repair swing and sliding driveway gates on residential homes and small commercial properties, including gate openers, photo-eyes and safety edges, keypads and remotes, batteries and solar charging, rollers and tracks, and hinges and latches. We service all major gate opener brands, such as LiftMaster, Elite, DoorKing, Viking, Apollo, Mighty Mule, FAAC and Ghost Controls.

We focus on getting your existing gate working again, safely, with a clear price and no pressure to replace what can be fixed.

Every visit starts with a $0 service call and a free estimate. You see the price before any work begins. Every gate repair includes a free 21-point safety check of the system, a 90-day labor warranty and a 1-year parts warranty. We are open 7am to 9pm, 7 days a week.

Braxdyne is not yet licensed by the CSLB (our license is in process), so we only take minor repairs under $1,000 total for parts and labor that need no permit, and we refer bigger jobs such as full gate systems or new gate installs to a licensed partner.

Signs you need gate repair

• The gate opener hums, clicks or beeps, but the gate does not move.
• The gate opens but will not close, or stops partway.
• Remotes, the keypad or the intercom work only some of the time.
• The gate stops working at night or after a few cloudy days, a sign of a weak battery or solar issue.
• A sliding gate grinds, jumps its track or drags on the ground.
• A swing gate sags, scrapes the driveway or will not latch.
• Photo-eyes or safety edges are damaged, misaligned or missing.
• The gate was hit by a vehicle and has not worked right since.

What we do on a gate repair visit

1. Listen first. We ask how the gate behaves and whether anything changed, such as an outage or a bump from a car.
2. Check the gate itself. We test the gate by hand, with the opener released, to see if it swings or rolls freely. A binding gate will wear out any opener.
3. Test power and batteries. We check the incoming power, transformer, backup batteries and solar panel output.
4. Read the controller. We check error codes, limit settings, force and obstruction sensitivity, and the control board.
5. Test safety devices. We check photo-eyes, safety edges and any loop detectors for proper function.
6. Test access controls. We test remotes, keypads and receivers, and reprogram codes if needed.
7. Give you a clear price. You get a written price and our recommendation before any work starts.
8. Repair, adjust and verify. We fix the problem, cycle the gate several times, confirm it reverses or stops when it should, and walk you through what we found.

Swing vs sliding gates

Swing gates open like a door, either as a single leaf or a pair. They are common on residential driveways and use arm-style or linear actuators mounted on the gate and post. Typical issues include sagging leaves, worn or loose hinges, misaligned actuator brackets, worn actuator gears, and latches that no longer catch.

Sliding gates roll sideways along a track or ride on cantilever rollers. They work well on sloped driveways and narrow lots. Common problems include worn V-groove wheels, debris or damage in the ground track, stretched or broken drive chains, worn gear racks, misaligned guide rollers and failing limit switches.

Whichever type you have, a gate that does not move freely by hand will strain the opener, drain batteries faster and trigger obstruction errors. That is why we always check the gate hardware before blaming the opener.

Gate openers, safety devices and access controls

Gate openers. The opener, also called an operator, includes the motor, gearbox, control board and limit settings. We repair stripped gears, failed motors and actuators, burned-out control boards, worn limit switches and loose wiring. We also adjust open and close limits and force settings so the gate stops in the right place without slamming.

Photo-eyes and safety edges. Modern gate systems use entrapment protection, guided by the UL 325 safety standard, to stop or reverse the gate if something is in the way. That usually means photo-eyes across the gate path and soft safety edges on the gate frame. When these are dirty, misaligned, cracked or disconnected, the gate may refuse to close or may not reverse when it should. We clean, realign, rewire and replace these devices so they work as designed.

Keypads, remotes and intercoms. Weather, sprinklers and sun are hard on gate keypads. We replace worn keypads, repair receiver issues, program new remotes, and clear old codes for better security.

Batteries, solar and power problems

Many Sacramento-area gates run on batteries, with power from a transformer or a solar panel. Batteries wear out over time, and summer heat can shorten their life. A gate that works in the afternoon but fails in the early morning, or after a few cloudy days, often has a weak battery or a solar panel that is dirty, shaded or undersized for how often the gate is used.

We test battery health and charging output, replace worn batteries, clean and reposition solar panels when needed, and check wiring and connections for corrosion. On hardwired systems, we also check transformers, fuses and surge damage after storms or power outages.

Rollers, tracks, hinges and latches

The mechanical parts of a gate take a beating. We replace worn rollers and guide wheels, clean and correct sliding gate tracks, tighten or replace loose hinges, adjust sagging swing gates where the frame allows, and repair or replace latches and gate stops. These small fixes often solve what looks like an opener failure.

Residential and small commercial gates

We work on driveway gates for single-family homes, ranch and rural properties, and small commercial sites such as small office buildings, shops and small HOA or apartment entrances. For small commercial clients, we focus on keeping the gate reliable and safe for daily traffic. If your site needs a full new gate system, major structural or electrical work, or anything that requires a permit, we will tell you up front and refer you to a licensed partner.

Safety first

A powered gate is heavy and moves with real force. Entrapment between a moving gate and a post, wall or fence is a serious hazard, especially for children. Here is what not to do:

• Do not disconnect, bypass or remove photo-eyes or safety edges to make the gate close.
• Do not let children play near the gate or use remotes and keypads as toys.
• Do not walk through the gate opening while it is moving. Use a separate pedestrian gate if you have one.
• Do not open the control box or work on wiring while the system is powered.
• Do not force a stuck gate with a vehicle.
• Do not crank up the force setting to overcome a binding gate. Fix the binding instead.

Service area

We provide electric gate repair across the Sacramento region, including Sacramento, Roseville, Elk Grove, Folsom, Citrus Heights, Rocklin, Davis and 60+ nearby cities. Call to confirm we can reach your property.

FAQ

Do you repair both swing and sliding gates?

Yes. We repair single and double swing gates and sliding gates, including the opener, safety devices, access controls and the gate hardware itself.

Why does my gate open but not close?

The most common cause is a blocked, dirty or misaligned photo-eye or a damaged safety edge. Weak batteries, limit settings and control board faults can also cause it. We test each one to find the real problem.

My solar gate stops working in the morning. What is wrong?

Usually the battery is weak or the solar panel is not charging enough because of dirt, shade or heavy use. We test both and recommend the right fix.

Which gate opener brands do you work on?

We service all major brands, including LiftMaster, Elite, DoorKing, Viking, Apollo, Mighty Mule, FAAC and Ghost Controls.

Do you install new gates or full gate systems?

Not at this time. We focus on repairs under $1,000 total that need no permit. For new gates or full systems, we refer you to a licensed partner.

Gate not working? Call Braxdyne at (916) 848-5050 or text a photo of your gate and opener. We are open 7am to 9pm, 7 days a week, with a $0 service call and a price before any work begins.