← All services
Home › Services › Gate Keypad & Remote Repair
Sacramento region · 7 days a week

Gate Keypad, Remote and Safety Sensor Repair

Repair and programming for gate keypads, remotes, entry intercoms, photo eyes, safety edges and loops.

$0 service call & estimatePrice before work7am – 9pm, 7 days90-day labor · 1-year parts warranty
Braxdyne Garage Doors & Gates
10% OFFLABOR
Seniors 62+ · Veterans & military · Returning customersOne discount per job. Just mention it when you call.
See discounts

Sometimes the gate and opener are fine, and the problem is how you tell the gate to move, or how the gate knows it is safe to close. A sun-cooked keypad, a remote that lost its pairing, a silent intercom or a photo eye knocked out of line can all leave you stuck at the end of your driveway.

Braxdyne repairs gate keypads, remotes and safety sensors in Sacramento and nearby cities in Placer, El Dorado, Yolo, Sutter and San Joaquin counties. We program and replace remotes and keypads, check basic telephone entry and intercom units, and test and repair photo eyes, safety edges and loop detectors on common residential operators such as LiftMaster, Mighty Mule, DoorKing, Viking, US Automatic and Ghost Controls. We also help HOAs, landlords and rental owners change codes and clear old remotes.

Every visit starts with a $0 service call and a free estimate, and we agree on the price before any work begins. Our work carries a 90-day labor warranty, and parts we install carry a 1-year parts warranty. We are open 7am to 9pm every day and take emergency calls until midnight.

Braxdyne is not yet licensed by the CSLB (our license is in process), so we only take minor repairs under $1,000 total for parts and labor that need no permit, and we refer bigger jobs to a licensed partner.

Signs you need keypad, remote or sensor repair

  • The keypad is dead, has stuck buttons, or accepts the code but the gate does not move.
  • Remotes work only up close, only some of the time, or not at all.
  • The telephone entry or intercom no longer calls out or opens the gate.
  • The gate opens but will not close, or reverses for no clear reason.
  • A photo eye is cracked, loose or pointed the wrong way, or a safety edge is torn.
  • Tenants, contractors or former owners may still have working codes or remotes.

What we do on a visit

  1. Sort out what fails. We run the gate from the control board, then from each remote, the keypad and the intercom, to find which input is the problem.
  2. Check receiver and keypads. We check the radio receiver, antenna and wiring, and the power, wiring and programming of keypads and entry units.
  3. Test the safety devices. We check photo eye alignment and wiring, test that safety edges respond when pressed, and check loop detector settings on gates that have them.
  4. Agree on a price. You get our recommendation and the price before any work starts.
  5. Repair, program and verify. We fix or replace the faulty part, program remotes and codes, and confirm the gate stops or reverses as designed.

What we work on

Keypads. Gate keypads live in sun, rain and sprinkler spray. Buttons wear out and water gets in. We repair wiring, replace worn keypads with compatible models and set up codes.

Remotes and clickers. We program new remotes, test range from the street, and clear lost or old remotes from memory so they stop working.

Telephone entry and intercom basics. We check power, wiring to the operator, programmed numbers and entry codes on common residential entry units. New phone lines, network wiring or new electrical circuits go to a licensed partner.

Photo eyes and safety edges. These stop or reverse the gate when something is in its path. The UL 325 safety standard for gate operators calls for entrapment protection, and many newer operators will not run normally if a monitored photo eye or edge is faulty or unplugged. We clean, realign, rewire and replace these devices. We never bypass them.

Loop detectors. Some gates use a wire loop in the driveway to sense cars. We test the detector and its settings. Cutting a new loop into the pavement is work we refer out.

New codes for HOAs and rentals. After a move-out, a sale or a finished contractor job, we can change codes, clear old remotes and give you a short list of what is still active.

What you can safely check yourself

Keep children, pets and cars clear of the gate while you test it.

  • Remote batteries. Try a fresh battery in the remote that fails, and test a second remote if you have one.
  • Power. If nothing responds, check for a tripped breaker or popped GFCI outlet and reset it once.
  • Photo eyes. Wipe the lenses with a soft cloth, clear plants or bins from the beam, and check that each eye still points at the other.
  • Obstructions. Clear the gate path and anything pressing on a safety edge.
  • Manual release. Only use it if your opener manual says how, and follow it exactly.

Never tape over, unplug or bypass a safety device to make the gate close. Never climb on or ride the gate, and keep remotes and keypads away from children.

When to call a technician

  • A new remote battery does not help, or all remotes stopped at once.
  • The gate still will not close after you clean and line up the photo eyes.
  • A safety edge is torn, a sensor wire is cut, or you need old codes cleared.

More gate help

See gate opener repair, sliding gate repair and swing gate repair, or visit our main electric gate repair page. Our guides on remotes and keypads that stop working and safety sensor alignment are written for garage doors, but many of the same simple checks apply to gates.

FAQ

Can you erase remotes from a tenant who moved out?

Yes. On most receivers we can clear the remote memory and program only the remotes you still have. We can change keypad codes at the same visit.

Can I disconnect the photo eyes so the gate closes?

No. They protect people, pets and cars from being hit or trapped, and many newer operators will not run normally without them. Call us and we will fix the sensor instead.

Do you work on HOA and shared gates?

We help with keypads, remotes, codes and safety sensors on small HOA and shared residential gates when the repair fits our limits. Larger access control systems go to a licensed partner.

Keypad, remote or sensor giving you trouble? Call Braxdyne at (916) 848-5050 or text a photo of your keypad, remote or photo eyes. We are open 7am to 9pm every day, with emergency calls until midnight, a $0 service call and a price agreed before any work.

Free estimate

Get a free estimate today

Leave your name and number — we call back within minutes, 7am – 9pm. The service call and the estimate are free, and you get the price before any work starts.

By submitting you agree that we may call or text you about your request. Msg & data rates may apply. Reply STOP to opt out. We never share your number.
Call now Free estimate