← All services
Home › Services › Sliding Gate Repair
Sacramento region · 7 days a week

Sliding Gate Repair: Rollers, Tracks and Chains

Sliding driveway gate repair for wheels, V-track, guide rollers, chain and gear rack.

$0 service call & estimatePrice before work7am – 9pm, 7 days90-day labor · 1-year parts warranty
Braxdyne Garage Doors & Gates
10% OFFLABOR
Seniors 62+ · Veterans & military · Returning customersOne discount per job. Just mention it when you call.
See discounts

A sliding gate should roll across your driveway smoothly and quietly. When it starts to grind, jerk, drag or jump its track, the problem usually is not the opener. It is the hardware the gate rides on, which takes a beating from gravel, dust, sun and the weight of the gate.

Braxdyne offers sliding gate repair in Sacramento and nearby cities in Placer, El Dorado, Yolo, Sutter and San Joaquin counties. We work on residential slide gates that ride on a ground track with V-groove wheels, and on cantilever gates that hang from rollers on posts. We replace worn wheels and guide rollers, fix chain and gear rack problems, and get a gate that came off its track back in line.

Every visit starts with a $0 service call and a free estimate, and we agree on the price before any work begins. Our work carries a 90-day labor warranty, and parts we install carry a 1-year parts warranty. We are open 7am to 9pm every day and take emergency calls until midnight.

Braxdyne is not yet licensed by the CSLB (our license is in process), so we only take minor repairs under $1,000 total for parts and labor that need no permit, and we refer bigger jobs to a licensed partner.

Signs you need sliding gate repair

  • The gate grinds, squeals or thumps as it rolls.
  • The gate jerks, stalls partway or reverses as if something is in the way.
  • A wheel wobbles, is cracked or no longer turns.
  • The gate has come off its track or leans away from the guide rollers.
  • The gate sags, drags or catches on the end post.
  • The chain is loose or jumping teeth, or the gear rack is bent.

What we do on a visit

  1. Look before we touch. We check how the gate sits on the track, lines up with the guide rollers, and whether it leans or sags.
  2. Test the gate by hand. With the opener released the way the manufacturer intends, we roll the gate through its full travel to feel for binding and rough wheels.
  3. Inspect wheels, track and rollers. We check each V-groove wheel and bearing, look for bent, buried or sunken sections of V-track, and check the guide rollers and end stops.
  4. Check the drive. We inspect the chain or gear rack, its brackets, and how it meets the opener sprocket.
  5. Agree on a price. You get our recommendation and the price before any work starts.
  6. Repair, align and test. We replace or adjust what is worn, reset opener limits if needed, cycle the gate several times and confirm the safety devices still stop or reverse it.

Common sliding gate problems we fix

Worn wheels. V-groove wheels carry the full weight of the gate. Bearings wear out, grooves flatten and wheels crack. A worn wheel makes the gate loud and forces the opener to work harder. We replace worn wheels with matching parts.

V-track problems. The track can get packed with gravel and dirt, bent by a tire or lifted by settling concrete. We clean and correct the track where we can. If a section must be replaced in new concrete or welded, we refer that work to a licensed partner.

Guide rollers. The rollers near the top of the gate keep it standing straight. When they wear or get knocked out of line, the gate can lean, rub or leave its track. We adjust or replace them.

Chain and gear rack. A loose chain can skip, and a bent or worn rack can make the gear slip. We adjust chain tension, replace worn chain, and repair or replace sections of rack and their brackets.

Off track, sagging or catching. We get a derailed gate back on its track safely and fix the cause, usually worn wheels, a low track or loose rollers. Straightening or welding a bent frame, or building a new gate, is fabrication work we refer to a licensed partner.

What you can safely check yourself

Keep children, pets and cars clear, and turn the opener off before you work near the track.

  • Power. If the gate does nothing at all, check for a tripped breaker or popped GFCI outlet and reset it once.
  • Remote batteries. If only the remote fails, try a fresh battery.
  • The track. With the opener off, sweep gravel and leaves off the V-track with a broom. Keep hands away from wheels, chain and gears.
  • Photo eyes. Wipe the lenses with a soft cloth and make sure nothing blocks the beam.
  • Manual release. Only use it if your opener manual says how, and follow it exactly.

Do not lift a gate back onto its track, pry it with a bar or push it with a vehicle. Never climb on or ride the gate, and never let kids play on it. A slide gate off its track can tip over.

When to call a technician

  • The gate is off its track, leaning or wobbling. Stop using it and keep everyone clear.
  • A wheel is cracked or seized, or the chain is hanging loose.
  • The gate still grinds or stalls after you clean the track.
  • The gate catches on a post or roller at the same spot every time.

More gate help

A rough slide gate often shows up first as an opener problem. See gate opener repair, swing gate repair and gate keypad, remote and safety sensor repair, or visit our main electric gate repair page. Our guide Electric gate opener not working? covers more simple checks for sliding gates.

FAQ

Why is my sliding gate so loud?

Grinding or squealing usually comes from worn wheel bearings, debris in the V-track or a loose chain. We find which one it is and fix it, rather than just adding lube.

My gate came off the track. Can I push it back?

We do not recommend it. A slide gate is heavy and can tip once it leaves the track. Keep everyone clear and call us. We will put it back safely and fix the reason it came off.

Do you work on cantilever gates?

Yes. We inspect and replace cantilever rollers and guide rollers, and adjust the gate so it rolls level and lines up with the receiver post.

Sliding gate grinding or off track? Call Braxdyne at (916) 848-5050 or text a photo of your gate, wheels and track. We are open 7am to 9pm every day, with emergency calls until midnight, a $0 service call and a price agreed before any work.

Free estimate

Get a free estimate today

Leave your name and number — we call back within minutes, 7am – 9pm. The service call and the estimate are free, and you get the price before any work starts.

By submitting you agree that we may call or text you about your request. Msg & data rates may apply. Reply STOP to opt out. We never share your number.
Call now Free estimate